Metal Punching & Stamping

High Performance Oil For Motor Core Stampings

Benefits :

• Colorless and odorless
• Extends life on metal mould during high speed stroking thus increasing productivity and safety.
• Contains chosen additives with highly purified substrate, special lubrication improvement and abrasion
• prevention agent.
• Provides excellent long term chemical stability.
• Does not exhibit oil staining during high speed punching with silicon steel plates or electrical thin plates.
• Ensures that each sheet can be readily separated through the use of a low boiling point solvent and
• special additives during the annealing process.
• Environment friendly product has no harmful effects on humans as all the ingredients used are approvedby FDA

Applications :High speed press in making motor cores.

Halal & Kosher Certified Food GradeForming Oil For Aluminium FoodContainers & Other Punchings

Benefits :

• Colourless & transparent oil with excellent long-term chemical stability.
• Does not react with Aluminium & copper.
• Oil vaporizes easily without leaving any stain marks & residue to avoid contamination.
• Contains highly refined base oil with special lubrication additives to prevent friction & wear.
• Has anti-abrasion agents to facilitate the forming process without cracks & deformation.
• Extends the life of tools & dies during the high-speed punching& forming processes.
• High load-carrying capacity to avoid tool breaks thereby increasing productivity.
• Oil can be very easily applied by dripping, dipping & mist lubrication process.
• Environment-friendly product has no harmful effects on humans as the raw materials used are FDA-
• approved.
• The product is HSE and RoHS compliance.
• The product carries Halal & Kosher certification.

High Performance Fin Press Oil for Air Conditioners and other Punching

Benefits:

• Vaporizes and does not exhibit oil staining during high speed punching with silicon steel plates or
• electrical thin plates.
• Ensures that each sheet can be readily separated through the use of a low-boiling point solvents and
• special additives during the annealing process.
• Extends life of metal moulds during high-speed stroking, thereby increasing productivity.
• Contains highly purified base oil with special lubrication improvement agents and abrasion prevention
• agent to reduce long collar cracks in fins.
• Provides excellent long term chemical stability. High load carrying capacity. Avoids tool breakages.
• Colourless and odourless. Does not react with aluminium or copper.
• Oil residue compatible with R-407C, R-409,R-410A,R-22,R-134A and other New Age Freons.
• Environment friendly product.has no harmful effects on humans.

Applications:

• High speed press in Aluminium, Si. Steel plate (Air Conditioners)
• For related stamping applications in various industries.
• For heat exchanger hair pin copper tubes bending.

High-performance metal forming fluids are specialized lubricants used in metalworking processes to enhance performance, improve tool life, and achieve high-quality finished products. These fluids are typically designed for demanding applications such as deep drawing, stamping, punching, and other metal forming operations. They provide excellent lubrication, cooling, and corrosion protection properties to ensure efficient and reliable metal forming processes.

Benefits :
Blend of special oils and extreme pressure and anti-wear additives. Stable emulsion when mixed with water. Provides good lubricity during high speed stroking, avoiding heat generation on the tooling thereby extending tool life.. Avoids short term rusting of lamination. Oil does not exhibit staining on silicone steel or electrical thin plates. Low foaming characteristics when mixed with water. Does not hamper post stamping processes like steam blowing and die casting. Non hazardous product, does not contain any ozone depleting substances or chlorinated, sulphur or phosphorous compounds. Environment-friendly product that does not cause eye or skin irritation. Can be easily mixed with hard water up to hardness of 400 ppm.
Applications:

• For high speed motor core and transformer lamination stampings

Water-based synthetic forming fluids are a type of metalworking fluid that is formulated primarily with water as the base, along with synthetic additives and lubricants. These fluids are designed to provide effective lubrication, cooling, and corrosion protection during metal forming processes while offering certain advantages over oil-based fluids.

SmoothForm FS 7000 is a water based synthetic forming fluid for use on steel, stainless and non ferrous metals. SmoothForm FS 7000 may be applied by brush, roller or spray after dilution withsoft water upto 1:10 dilution ratio, with the optimum being determined by requirements of lubricity and corrosion protection. SmoothForm FS 7000 is compatible with subsequent processes like aqueous degreasing, phosphating, varnish work and welding. Also expected to be suitable for metal parts which come in contact with Freon free refrigerant fluids.

Premium Grade Cold Forming Oil is a type of lubricant specifically designed for cold forming processes. Cold forming is a manufacturing technique that involves shaping or forming metal parts at or near room temperature, without the need for heating or melting the metal.

Benefits:

• Light Colored & very low odor cold forming oil, specially formulated to offer superior performance in severe drawing operations. Contains extreme pressure additives to enhance load carrying capacity, thereby increasing life to the die. Product is designed primarily to keeping high speed steel Forming. Improved die life and low mandrel wear. Low Misting & Low Evaporating, hence keep the shop floor healthy & clean. Superior surface finish of metal. Contains anti-oxidants and anti-corrosion additives to extend the life of oil. The Film formed by EP additives in Smoothform 2860 can withstand very high temperature ( up to 1000 °C)

Applications:

• It is suitable for ferrous metals and high alloy steels .
• It is used for forming large fastener plugs & bolts in heading machines where high EP property is desired.
• It is also used for stainless steel wire drawing application.

High Performance Motor Core Press Oil is a specialized lubricant designed for use in motor core pressing operations. Motor core pressing involves the assembly of laminated iron cores that form the stator or rotor of an electric motor. The pressing process requires a lubricant to reduce friction and facilitate the smooth assembly of the laminations.

Benefits

• Colorless and odorless Extends life on metal mould during high speed stroking thus increasing productivity and safety. Contains chosen additives with highly purified substrate, special lubrication improvement and abrasion prevention agent. Provides excellent long term chemical stability. Does not exhibit oil staining during high speed punching with silicon steel plates or electrical thin plates. Ensures that each sheet can be readily separated through the use of a low boiling point solvent and special additives during the annealing process. Environment friendly product has no harmful effects on humans as all the ingredients used are approvedby FDA.

Applications :
High speed press in making motor cores.

Fin press oil is a specialized lubricant used in the manufacturing process of air conditioners and other metal punching operations, particularly for the production of heat exchanger fins. Fin press machines apply high pressure to metal sheets, shaping them into the desired fin profiles.

Benefits :
Vaporizes and does not exhibit oil staining during high speed punching with silicon steel plates or electrical thin plates. Ensures that each sheet can be readily separated through the use of a low-boiling point solvents and special additives during the annealing process. Extends life of metal moulds during high-speed stroking, thereby increasing productivity. Contains highly purified base oil with special lubrication improvement agents and abrasion prevention agent. Provides excellent long term chemical stability. Does not react with aluminum or copper.Colorless and odorless. Oil residue compatible with R-407C, R-409, R-410A, R-22, R-134A and other New Age Freons. Environment-friendly product. Has no harmful effects on humans as the raw materials used are FDAapproved.



Does not contain Ozone Depleting Substances
Applications :

• High speed press in Aluminum, Si. Steel plate
• For related stamping applications in various industries.
• For heat exchanger hair pin copper tubes bending.

• Packaging Details: 30 Ltr , 210 Ltr